Pages

Saturday, August 6, 2016

More Tinkering with 6mm Air Combat Rules

I've continued moving along with my idea for modern air combat rules.  Both before and during the time that I've been working on this, several sets of rules have been suggested to me. Unfortunately, they have either been out of print, or were not as detailed as what I am hoping for.  I am keeping a couple as back-ups in case my effort proves to be futile.

So, I've been re-learning a bit of physics, and doing a fair bit of research, when I can find time.  I have roughed out most of the stats for the aircraft involved in my African imagi-nation campaign. 

Basic characteristics of the game are (any of this could change):
Scale:1/2288
Turn: Represents 5 (probably going to change to 6) seconds, and consists of three impulses.  Movement, shooting, and damage is resolved each impulse.  Sighting and speed changes are made at the start of each turn.
Movement Point: Equals 1/2 inch, with the speeds ranging  2-21 movement points per turn so far, with the Mig21F being the fastest jet currently included.

Thus far, the characteristics for each aircraft include the following:

Speed:
Minimum - Under which, you fall out of the sky
Cruise
Maximum -level flight
Terminal - Max dive

Roll Rate- applied per movement point
Turn Rate- applied once per impulse
Acceleration/Deceleration-
Dive and Climb speed gain/loss-
Gun Table- Number of guns x appropriate gun type, number of hits are a function of pounds per second of ammo thrown at the target.
Max Hits- Each aircraft will take a number of hits (ranges from about 30-75) with critical hits being scored on every eighth hit and on each hit beyond maximum (criticals range from losing range, speed, or controls, to pilot dead or plane exploding).
Bursts-
Sighting table-
Ceiling-
Range-
Radar-
Missiles-

Radars will have to detect targets, missiles will have to lock on, successfully fire and then track or be guided to the target.  There will be a period of time required for lock-on, which for some early missiles can span more than a turn.

I'm trying to find mechanics and compromises that minimize calculations for energy loss or gain during the turns.  I  think that I've found a way minimize the number of turn gauges needed for aircraft relative to speed, but will have to experiment with it in 3-D maneuvers.

 I've also roughed out a couple of prototype flight stands for working out the mechanics.

The stand is two feet tall, with a weighted two inch square base
 
The clip uses a miniature clothespin with brass wire inserted into a jet nozzle. 
The clip allows roll and pitch to be depicted.

In early July, I ordered a number of 1/285 and 1/300 airplane models from I-94 Enterprises and Scotia.  Both offered great service, and I am quite happy with the models.  Haven't had a chance to do anything with them, so here they are straight out of the box.

From I-94 Enterprises, I picked up the following from the Raiden line:

They are Mig 21, Mig 17, Magister, and F5A.

Dave Winfree was fantastic to deal with in getting these, with exceedingly fast service, and great communications.

Scotia provided the following, and despite being across the Atlantic, got the models to me inside of two weeks, with notification of each step in the ordering and shipping process.

Vautour and buccaneer.

Initially, I was extremely surprised and happy to find that everything jet needed for my games was available, but then found that Skyraider was out of business  They had a G91, and I was going to use an MB339 as a proxy for the Strikemaster.  But now it looks like I will may be getting into the 1/285 model aircraft industry, as I will be scratch building these. 

Some years ago (like maybe 12), I tried making some models for the Arab-Israeli wars, as there wasn't much available then, and ended up with these unfinished masters:

They are Magister (with damaged tail), Super Mystere and Ouragon

Though I never completely detailed them (my adversary for the mid-east wars moved away), the process went very quickly, so I expect that mastering these two won't be a big delay.

The goal is to allow three dimensional dogfighting with jets and short range missiles on a tabletop, where individual aircraft maneuver to take advantage of performance advantages.  Additionally, I hope to also manage beyond visual range engagements if needed (they will be rare in my games). 

Hoping to try the first run-through in the next few days. Sorry some of the pix are so crappy, working with yet another camera.

3 comments:

  1. Have you checked Shapeways? I would imagine someone is doing a 1/285th G91. Regardless, would love to see you start selling your own planes, as I know they will be really grand!

    ReplyDelete
    Replies
    1. Yes, someone had mentioned that to me previously. They do have the G91, but the sculpt has a very faceted surface, and I figured I could make a smoother one without too much effort and time.

      Delete
  2. Looking forward to this...great idea!

    ReplyDelete